The Kaoyi ET2070DKA is an electronic transformer of minimum 20 and maximum 70 Watts and especially suitable for low voltage (12V) halogen lamps. The transformer is equipped with:

• A soft-start (which promotes the life of the lamp)
• Thermally protected
• Short-circuit protected
• Overload protected

The halogen transformer is also dimmable with the most common dimmers. 

Lamps

The Kaoyi ET2070DKA halogen transformer is suitable for the following lamps:

Halogen lamps - 20-70 watts

Maximum power

This Kaoyi ET2070DKA halogen transformer is suitable for 20-70 W/VA. Never load the transformer more than 80% of its maximum power!

What is an electronic halogen transformer?

Electronic halogen transformers for lighting sold by ET48 convert the mains voltage of 220 volts to the safe 12 volts low voltage. This type of transformer is therefore intended exclusively for halogen lamps that operate at this low voltage. Because of this lower voltage, these lamps can be used in, for example, the so-called 'wet areas' (shower, bath, is also called zone 1) of bathrooms or used for ceiling spotlights. In these cases, the transformer is concealed above the ceiling.

The size and power of the halogen transformer depends on the wattage and number of halogen lamps that can be connected. That is why there are different shapes and models of transformers

CAUTION: not suitable for dimmable 12V LED lamps

Halogen transformers are NOT suitable for dimmable 12V lamps. The lamps will flicker, are poorly dimmable and will break down quickly. LED lamps require much less power than halogen lamps. If you switch to energy-efficient 12V dimmable LED lamps, it is very wise and also necessary to replace the transformer with a so-called dimmable LED driver. These are suitable for dimming LED lamps. You will find dimmable LED drivers on this page.

Warranty

We offer a 2-year warranty.